28G0,75+2×0,25 Elevator Traveling Cable
USD2 USD1
Elevator interference problems are eliminated with a 28 G 0.75 + 2x0.25 mm² shielded flat cable, which is a 30 cores flexible elevator cable.
H05V3V3H6-F type of 28 G 0.75 + 2×0.25 mm² elevator traveling cable is designed to make your lift run smoothly and safely. It has 27 number-coded wires, and 1 green-yellow wire, each 0.75 mm² thick, so you can easily tell them apart. There are also two special shielded wires that are 0.25 mm² thick. These shielded wires are twisted together and wrapped in foil to block out any electrical noise that might mess up the signals.
* Order Details
28G0,75+2x0,25 Elevator Traveling Cable
Upgrade your elevator communication with 28G0,75+2x0,25 mm² elevator traveling cable and interference protection for optimal performance.
Product SKU: 28G0,75+(2×0,25)
Product Brand: MKS KABLO
Product Currency: USD
Product Price: 1
Product In-Stock: InStock
4.96
16G0,75+2x(2×0,50) Elevator Travel Cable
H05V3V3H6-F 16G0,75+2x(2x0,50) flat elevator cable is used for serial communication in elevators. This cable has a total of 4 shielded cores.
Flat Elevator Cable – 28G0,75+2x(2×0,50)
32 Cores flat elevator cable which is 28 G 0.75 + 2x (2x0.50) mm² shielded cable used elevator interference solution has +2 spare cables.
28G0,75+4x(2×0,34) Elevator Travelling Cable
36 Cores flexible lift cables with a cross section of 28 G 0.75 + 4x (2x0.34) mm² shielded flat cable and 8 colored digital cables can be applied.
Elevator Traveling Cable CAT6 (4xCAT6)
Elevator traveling cable CAT6 is used for elevator IP cameras. 4XCAT6 cable is supported by 2 steel wire ropes and suitable for the RJ45.
Elevator Cable Hanger – Wider & Effective Solution
Flat elevator cable hanger can be seamlessly used for all types of flat elevator cables up to 980 mm in width.