Elevator Traveling Cable CAT6 (4xCAT6)
Elevator traveling cable CAT6 is used for elevator IP cameras. 4XCAT6 cable is supported by 2 steel wire ropes and suitable for the RJ45 connector.
As elevators evolve into connected smart devices, high-bandwidth data transmission is critical. The Elevator Traveling Cable CAT6 is a high-performance solution designed to support Ethernet applications in elevators. Unlike standard cables, this product provides reliable Gigabit connectivity for IP cameras, Wi-Fi access points, and multimedia displays within elevator cabins.
Elevator Traveling Cable CAT6 for IP Cameras
This specialized elevator cable consists of four separate CAT6 elements, fully optimized for RJ45 plug systems that support AWG 26-wire cables. It is designed to maintain signal integrity over long distances, supporting channel lengths of up to 50 meters from transceiver to receiver. For distances longer than 50 meters, a signal booster can be added between the two cable connections.
- Extended Data Range: Specifically designed to support a maximum channel length of 50 meters, but with the help of a booster, it provides a stable connection in taller building elevators.
- Superior Shielding (S/FTP): Designed with double shielding consisting of aluminum/PETP foil and tinned copper braiding in each pair. This ensures maximum performance against electromagnetic interference.
- High-Speed Performance: Supports all Cat.6 applications, including 10 Base-T, 100 Base-T, and 1000 Base-T (Gigabit Ethernet).
- Robust Construction: A version reinforced with 2x Steel Ropes is also available to withstand mechanical stress and provide a free suspension length of up to 50 meters.
Applications
Ideal for data-intensive elevator systems requiring LAN/Ethernet/Internet connectivity:
- IP-based Security Cameras (Elevator Traveling Cable CCTV for Analog Security Cameras).
- In-car Wi-Fi Access Points.
- High-Definition Digital Signage and Advertising Displays.
- ISDN and VoIP communication systems.
Technical Specifications
Below are the technical characteristics of the elevator traveling cable CAT6 based on EN 50214 standards.
Structure: 4x4x2x AWG26
Shielding: S/FTP (Foil + Tinned Copper Braid)
Max Channel Length: 50 Meters
| Technical Specifications | |
|---|---|
| Application | |
| Elevator data LAN cable for RJ45 plug systems supporting AWG26 stranded wires. | |
| Construction | |
| Conductor: | Flexible bare Copper strand (AWG 26) |
| Insulation: | PE (Polyethylene), Ø 1.0 mm |
| Pair Shield: | Al/PETP Foil |
| Overall Shield: | Tinned Copper wire braid (S/FTP) |
| Outer Sheath: | PVC, Black or Grey |
| Electrical Properties | |
| Rated Voltage: | 100/100 V |
| Loop Resistance: | Max. 270.0 Ω/km at 20°C |
| Nom. Impedance: | 100 Ω (at 100 MHz) |
| Nom. Capacitance: | 43 pF/m (at 800 Hz) |
| Mechanical Properties | |
| Travel Speed: | Max. 4 m/s |
| Max Channel Length: | 50 meters (transceiver to receiver) |
| Operating Temp: | -15°C to +70°C |
Dimension and Capacity Table:
| Part no. | Nominal Cross Section [n x mm²] |
Max. Free Suspension [m] |
Overall Dimensions approx. [mm x mm] |
Weight approx. [kg/km] |
Steel Support Diameter [mm] |
Supply Length [m] |
|---|---|---|---|---|---|---|
| 165 380 | 4xCAT6 | 45 | 32 x 8.2 | 380 | – | 500 |
| 165 440 | 4xCAT6 ST | 50 | 39 x 8.2 | 440 | 2×1,5 | 500 |
| 165 520 | 24 G 0,75 + CAT6 | 45 | 38 x 8.2 | 520 | – | 500 |
* Product Enquiry
Elevator Traveling Cable CAT6 (4xCAT6) » MKS KABLO - Elevator Cable Systems
Elevator Traveling Cable CAT6 for Gigabit Ethernet. Perfect for IP cameras, multimedia screens, and Wi-Fi access points. Get a quote for Elevator CAT6 cables.
Product SKU: 4XCAT6
Product Brand: MKS KABLO
Product Currency: USD
Product Price: 9.90
Price Valid Until: 2027-12-21
Product In-Stock: InStock
4.93
Elevator Traveling Cable Fiber Optic (4FO)
Flat elevator cable integrating 3x1.5 mm² power cores, dual CAT6 Ethernet elements, and a 4-core fiber optic unit for ultra-high-speed connectivity in smart elevators.
Elevator Traveling Cable CCTV – 12/24 Core + TV HF 75
Elevator Traveling Cable CCTV featuring an integrated HF 75 coaxial element and double shielding designed for interference-free video transmission in elevator CCTV and multimedia systems.
Elevator Cable Hanger – Wider & Effective Hanger
MKS Flat Elevator Cable Hanger can be seamlessly used for all types of flat elevator cables up to 980 mm in width.